Colore Frattura
Shape + size:
Freeze Thaw Rated
Heat Resistant
UV Resistant
Radiant Heating Compatible
Slip Resistant
Key: Applicable | Not Applicable | * = See material guidelines for specific requirements
Colore Frattura
Freeze Thaw Rated
Heat Resistant
UV Resistant
Radiant Heating Compatible
Slip Resistant
Key: Applicable | Not Applicable | * = See material guidelines for specific requirements
Description | Rating |
---|---|
Surface Type | Unglazed |
Finish Type | Matte |
Color Variation | Level 3 (medium) |
Texture Variation | Level 1 (smooth) |
Size Variation | Level 1 (slight) |
Dimensions | 4" x 4" x 0.625" |
Water Absorption | n/a |
DCOF | avg. 0.629 |
Pieces per sqft | 9.0 pcs/sqft |
Weight per sqft | 60.75 lbs/sqft |
Pieces per Box | 48 pcs/box |
Milled Matcha
Color Variation: Level 3 (medium)
Texture Variation: Level 1 (smooth)
Size Variation: Level 1 (slight)
category | level 1 | level 2 | level 3 | level 4 | level 5 |
---|---|---|---|---|---|
color variation |
low | slight | medium | heavy | extreme |
texture variation |
smooth | slight | medium | heavy | n/a |
size variation |
slight | medium | heavy | extreme | n/a |
Download our material guidelines to read more about the ratings in our tile variation & imperfections guide.
Milled Matcha
Pits / Chips: Level 1 (will occur)
Cracks / Crazing: Level 1 (will occur)
Iron Spots: n/a
category | level 1 | level 2 | level 3 |
---|---|---|---|
pits / chips | will occur | slight | medium |
cracks / crazing |
will occur | slight | medium |
iron spots | will occur | slight | medium |
Download our material guidelines to read more about the ratings in our tile variation & imperfections guide.
REQUIRE YOUR INSTALLER PERFORM A “DRY RUN”. Before installing, make sure to lay out and blend ALL BOXES of your tiles so that your variations in color, and tiles that bear chips and pits are artfully placed as you would like. The best placement of these nuances throughout your installation must be guided by you and/or your design professional to realize the best possible blend of your shipment of our limited-availability tiles. Your installation is only as good as your DRY RUN.
REQUIRE MOCK-UP BOARDS. We urge all our clients to require creation of mock-up boards before installation. This allows you and your designer/installer to test your tile layout in mock-up form and lets you view your design in the space and lighting in which it your tiles will be installed. Mock-ups also help ensure your grout color and grout joint size are to your liking.
SUBSTRATE. Before installation, make sure your project engineer and installer have prepared your substrate properly. Surfaces should be flat, clean, and free of any sealants, waxes or other contaminants prior to installation. Also, ensure that any drainage requirements have been taken into consideration before beginning installation.
MATERIAL GUIDELINES. Review the material guidelines for the specific tile/material.
SEALING, MAINTENANCE, AND CARE. Follow the installer’s sealing, maintenance, and care guidelines.
BASIC CARE. Clean up all spills immediately, particularly any including acids, chemicals, and abrasive materials. Avoid harsh chemicals and acidic or alkaline cleaning products.
ANNUAL SEALING AND REFINISHING. Hire a professional to seal or refinish annually based on the design professional/installer recommendations.
For more questions, please check out our FAQ section in our help center.
Thank you for inviting us into your inbox!
© 2024, OUTERclé. All Rights Reserved
SCULPTURES
DZEK + FORMAFANTASMA EXCINERE NIMBUS Shop All →